SLIDER

31 Weeks & Nursery Plans



Pregnancy Update
Weeks along: 31! Only 9 to go. I can't believe the countdown is under 10 now! I thought this time would never come!
Size of the baby: She is over 16 inches long and weighs about 3.3 pounds, which is comparable to four navel oranges
Movement: Baby is moving more than ever before! I feel a lot more of her general movements now, not just her big kicks and punches. She tends to push up at the top of my stomach when I'm sitting down, especially if I'm slouching. As I'm writing this it kind of feels like she might be pushing on my ribs, but I'm not completely sure.
Symptoms: I've felt pretty good this week. I haven't gotten any leg cramps and my back hasn't been hurting as much. I still get tired fairly easily though.
Purchases: John and I decided to see if our local DI had any decent baby clothes and we were pleasantly surprised. I found three cute little dresses and one top. All of them look really new and have no stains on them. We also bought our first box of diapers this week! Exciting!

Nursery: I've started working on some of the decorations for the nursery. We've actually been thinking about moving near Bountiful in early 2013. If that's the case then I probably won't put up the nursery decorations in this apartment.

Nursery Plans
Before I had even found out the gender of our baby, I knew that I didn't want to do a typical pink nursery if we were having a girl. Also, the walls in our apartment are white and we're not allowed to paint them, so I knew that all the color in the room would have to come from the decorations and bedding. I couldn't work out which color scheme would work well until I saw this picture:
Source here
I really love the colors of these pom poms and I think they look great in a white room. I think that tissue paper pom poms are so cute too, so I'm planning on making some for our nursery. I've already bought the tissue paper, but I'm waiting to make them until I know how long we'll be staying in this apartment. 

The rest of my plans for the nursery came from Pinterest. I love that site. 

I'm going to do a picture frame collage like the one in this picture: 
Pin found here
Here are the frames that I've already bought and painted (I still need to get a few more):

I'm also thinking of incorporating the first letter of the baby's name in the collage. I was thinking of painting a wooden letter, but now I'm thinking of wrapping a wooden letter in yarn, like this:
Pin found here
To add a little more color to the room, I'm going to put up some blue or green curtains. I'm thinking of making ruffle curtains like these:
Pin found here
Since ruffles are just so darn cute, I'm hoping to also make a ruffle crib skirt like this one:
Pin found here
For the other wall in the nursery, I will probably do something similar to one of these pins:
Pin found here
Pin found here
Finally, here is the crib that I'm loving right now. I'm a little torn about whether we should get it in white or cherry. I think that it is so cute in white, but I'm worried about how it will look in an all white room. It might be alright if the crib bedding is colorful.
Found here
I'm starting to realize how little time I have to get things done! There's still so much to buy and so much to make. Our little girl is going to be here before we know it!

No comments

30 Weeks


Sorry for being MIA for the past couple of weeks. I had a bunch of tests and a paper that I had to work on for about 30 hours. Yep, be jealous. 

Time for a pregnancy update!

Weeks along: 30! I'm now 3/4 of the way through this pregnancy. 10 weeks to go!
Size of the baby: size of a green cabbage. She is supposed to be about 15.7 inches long and weighs 3  pounds.
Movement: she has started to kick/punch my bladder all the time. Also, I felt these little frequent movements the other night, which I think were from her hiccuping. 
Symptoms: I haven't been getting as many cramps in my legs. My major issue right now is a sore lower back. It usually starts to hurt in the afternoon, especially if I've walked a lot earlier in the day
Cravings: I haven't really been craving anything this week
Belly button: the very top of my belly button is starting to poke out now. It's so weird
Purchases: I bought some bow hair clips today. I had a lot of hair when I was born, so I'm guessing that our little girl will too. I can't wait to see these little bows in her hair!



No comments

28 Weeks



I have officially entered my third trimester! Yay! This pregnancy seems to be going by so much faster now that I'm in school again. I have to say that going to school while pregnant is exhausting, though. Every day I come home from school and feel like I'm ready for bed. I guess I should start taking a naps but the problem is that I hate naps. They're little time thieves, stealing my day.  I love to sleep in but I hate to take naps. Does it make sense? No, because sleeping through the entire morning takes up a lot more of my day than a 30 minute nap. I'm aware of this, but I guess I'm just irrational because I still hate naps.

Okay, enough about my silliness, let's get down to business. Here's a bit more of a pregnancy update:

Weeks along: 28 weeks
Size of the baby: size of a Chinese cabbage (according to the pregnancy app on my phone). She should be about 2 1/4 pounds and 14.8 inches from head to toe.
Movement: there's a lot of it. My mum and sister both got to feel a kick this week. The baby gets really active at about 11pm-12am at night (right when I'm trying to fall asleep, haha). She's been kicking my bladder more frequently too. What a little punk.
Symptoms: I've been getting cramps in my calves every few days. I usually get them in the mornings when I'm still in bed. They are awful! I even got one during water aerobics yesterday. Just one of the many joys of pregnancy.
Cravings: Spaghetti. I've been eating it every day. It's weird because I had a really strong aversion to it throughout the first half of my pregnancy!
Belly button: It's still an innie, but it's getting shallower and more stretched sideways
Wedding ring: I can still fit my engagement ring but I can't wear both my engagement ring and wedding band at the same time anymore. Particularly if it's a hot day.
Nursery: I haven't really gotten started on the nursery. Our second bedroom is currently being used as a study and as a storage area. I've moved some things out of it and reorganized a little. I've partly planned out how I want to decorate it, but I haven't actually started doing it. I'll hopefully be writing a post later this week about my plans.

By the way, I had the lovely glucose test last week. I had to drink the glucose stuff while I was in class. If anyone was watching me while I was drinking that, they would have seen some interesting facial expressions (ones of disgust to be more specific).

2 comments

DIY Layered Necklace


I always struggle to spend money on jewelry. It's probably because I don't wear a lot of it, but this may be due to the limited options I have because I rarely buy jewelry. It's a vicious cycle. Well, lately I have been seeing a lot of people wearing statement necklaces and decided that this was something I wanted to try. I started looking around for necklaces that appealed to me. One item that really caught my attention was this layered necklace from preebrulee.com:


Even though I loved this necklace, I couldn't bring myself to spend the $42 they are asking for it. Even if I was willing to do this, this particular necklace always goes out of stock really quickly. It's construction didn't seem too complicated, so I decided to see if I could find any round beads in a similar color. After a long and unfruitful search, I realized that I could paint some cheap pearl beads the color that I desired. Making this necklace yourself will only cost about $10-15, which is a lot better than $42!

Here is the tutorial for this necklace. Be aware that this is a time consuming project if you paint the beads by hand like I did. Using a spray paint would make it considerably faster, but unfortunately I couldn't find a spray paint in the color I desired.



  • 178 x 6mm faux glass pearl beads
  • 163 x 8mm faux glass pearl beads
  • 119 x 10mm faux glass pearl beads
  • Paint for glass or plastic
  • Paintbrush
  • Thread
  • Clear acrylic gloss coating spray
  • Jewelry wire
  • Clear monofilament jewelry wire
  • 3 jump rings
  • 12 crimp beads
  • 1 round jewelry clasp or lobster claw clasp



String about 50-60 beads on a strand of thread. Tie the thread up so that you can paint the beads without the beads resting on anything. Leave enough room on the string that you can still move the beads around.


Paint the beads on the thread, making sure to get the area where the beads will touch each other.
(I found the most effective technique was to paint long strokes down several beads, covering as much of the beads as possible, and then going back and painting the areas missed on the individual beads)


String and paint several more strands of beads until all of the required beads have been painted.
As the beads start to dry, make sure to move the beads around on the string, separating them from one another so that they don't all stick together. 

Allow the beads to dry completely (I left mine overnight). When dry, spray them with the clear acrylic gloss spray to prevent the paint from chipping. Allow the beads to dry for about 24 hours (or for the length of time indicated by the directions for the spray)
*You can skip the acrylic gloss spray if you wish and the beads will still look great and shouldn't chip too much*

After 24 hours, remove the beads from the thread so that they can be threaded onto the monofilament jewelry wire. 

First layer:
Thread some monofilament jewelry wire through a crimping bead and a then a jumper ring. Feed the end of the wire back through the crimping bead and use some pliers to squish the bead around the wire. 
For this first strand, thread 78 of the smallest beads (6mm) onto the wire. Leaving a couple of inches at the end of the strand, cut off the remaining monofilament. Place a crimping bead and jumper ring at the end of strand and secure as you did at the beginning of the strand. Tuck the ends of the monofilament into the beads so that they are hidden.

Second layer:
Attach another strand of monofilament to one of the jumper rings of the first strand. 
Add 50 of the largest beads (10mm) to the wire
Secure the end of this strand to the other jumper ring of the first strand
This strand will be longer than the first.


For the remaining strands, attach them in the same manner as attached the second strand. All of the strands will share the same jumper rings. 
These are the number of beads to thread on the remaining layers:

Third layer: 69 medium beads (8mm)
Fourth layer: 100 small beads (6mm)
Fifth layer: 69 large beads (10mm)
Sixth layer: 94 medium beads (8mm)

Carefully open up one of the jumper rings with pliers and attach a jewelry clasp onto it. Close it again with the pliers. At the other end of the necklace, attach another jumper ring (or several if you want to make putting the necklace on a little easier) to the jumper ring.

Make sure that all of the ends of the monofilament are hidden by threading them back through the beads.

And you're done!


Since making this necklace, there are some improvements that I would consider making. You may want to use a multi-strand clasp to help the strands sit better and to make putting the necklace on easier. If you use a multi-strand clasp, each strand will be able to have its own ring to attach to (or only a couple of strands will have to share a ring)
A multi-strand interlocking clasp 
I really love this necklace. I plan on making a coral colored one soon!

No comments

26 Weeks

I'm 26 weeks along in my pregnancy! Only 14 weeks to go. Our baby girl is 14" long from head to toe and she weighs almost 2 pounds! I'm feeling great, just a little tired.

I realized that I haven't posted any pictures from our last ultrasound, so I'll do that now. These were taken when I was 20 weeks along. This was the day we found out that we were having a girl! I had convinced myself that we were having a boy, so I was actually quite surprised to find out that I'm going to have a daughter!





At this stage the baby doesn't have a lot of fat yet, so they tend to look somewhat skeletal. The ultrasound technician said that little kids who see these ultrasounds say that the babies look like Gollum, haha.

John recorded the whole ultrasound. He put some of it into a youtube video. If you're interested in seeing this here's the link: http://www.youtube.com/watch?v=VC3aE2AgWBs
(Please excuse my camera awkwardness if you do watch this)

I can't wait to see what our little girl will look like when she's born! I'm sure she'll be the cutest thing in the world.

We haven't made too many big purchases for the baby, but we have been buying clothes. I just can't resist the ones with cute little animal prints and ruffles on the back. Here is what I have bought so far (notice the variety of animals):










Fortunately for us, we've also been given a lot of baby clothes from our sisters-in-law (Kathryn, Tori, and Jenn). These tubs are filled with clothes:

Now our baby girl needs some cute hair accessories! I haven't bought any yet because I'm hoping that I can make some myself. We'll see how that goes!




No comments

DIY Painted Vases




A few months ago I was looking on Pinterest and found a tutorial for some cool painted vases and decided to try it out.  I bought a few vases from the Dollar Tree and some paint from Walmart and got to work. I'm pretty happy with how they turned out and it cost just over $7 for five vases. I've written my own brief, simple version of the tutorial below.



1. Paint for glass (I used Folkart Enamels Paint in Aqua)- $1.19
2. Clear vase- $1
3. Paint Brush

(You may want to also apply a surface conditioner to the inside of the vase before you paint it. I didn't and my vases still look great)



1. Wash the vase and allow to dry.



2. Pour some paint into the vase and use a paintbrush to spread it around the inside of the vase.  Keep adding more paint  until the inside of the vase is covered.


 3. Once you've covered the inside of the vase with a layer of paint, allow the vase to dry.

4. Apply one or two more layers of paint, until the vase is a solid color with no transparent areas. Let dry overnight

I painted three vases this color and put them on a bookshelf in our living room. They add a nice splash of color to the room!

I decided to try something different for a couple of the vases. I wanted one vase to hold my wedding bouquet and another to hold one of my bridesmaid's bouquets. I used a light blue paint because that was one of my wedding colors. In order to be able to see some of the ribbon the bouquets were wrapped in, I decided to have a transparent section on each of the vases. To achieve this, I put tape on the inside of the vase and then painted the vase. This technique didn't work as well as I had hoped. When I tried to remove the tape, there was not a very clean line where the paint ended. To make the vases look better, I used a black marker to define the area where the paint ended. 
 I'm not completely happy with the result, but at least they are unique!

Here's the link to the original tutorial:  http://www.sugarandcharmblog.com/2011/01/easy-and-beautiful-enamel-painted-vases.html
1 comment
© The Violet Eve • Theme by Maira G.